Optional) Setting The Format Of Dhcp User Name And The Password - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
domain domain-name
The authentication domain is created.
Step 4 Run:
quit
Return to the AAA view.
Step 5 Run:
quit
Return to the system view.
Step 6 Run:
interface interface-type interface-number.subinterface-number
The sub-interface view is displayed.
Step 7 Run:
authentication-domain domain-name
A user authentication domain is bound to the sub-interface. When a user goes online, the
S9300&S9300E selects the bound domain to authenticate and authorize the user.
By default, the user authentication domain bound to a sub-interface is the global default domain.
You can change the domain by running the domain command in the system view.
----End
4.3.4 (Optional) Setting the Format of DHCP User Name and the
Password
The format of the DHCP user name needs to be set in server authentication.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
dhcp user-name format-include { ip-address | mac-address | option82 | sysname }
The format of the DHCP user name and the sequence of elements in the user name are specified.
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 IP Session Configuration
93