Applicable Tools; Operating Procedure - YASKAWA SGD7S Product Manual

7.3 Trial Operation for the Servomotor without a Load

7.3.2 Applicable Tools

• Linear Servomotors
Pn383
Pn305
Pn306
7.3.2

Applicable Tools

The following table lists the tools that you can use to perform jogging and the applicable tool
functions.
Digital Operator
SigmaWin+
7.3.3

Operating Procedure

Use the following procedure to jog the motor.
1.
Click the
2.
Select JOG Operation in the Menu Dialog Box.
The Jog Operation Dialog Box will be displayed.
3.
Read the warnings and then click the OK Button.
7-8
Jogging Speed
Setting Range
0 to 10,000
Soft Start Acceleration Time
Setting Range
0 to 10,000
Soft Start Deceleration Time
Setting Range
0 to 10,000
Tool Function
Fn002
Test Run - Jog
Servo Drive Button in the workspace of the Main Window of the SigmaWin+.
Setting Unit Default Setting
1 mm/s 50
Setting Unit Default Setting
1 ms 0
Setting Unit Default Setting
1 ms 0
Operating Procedure Reference
Σ-7-Series Digital Operator Operating Manual (Manual
No.: SIEP S800001 33)
Operating Procedure on page 7-8
Speed Position Force
When Enabled Classification
Immediately Setup
Speed
When Enabled Classification
Immediately Setup
Speed
When Enabled Classification
Immediately Setup