YASKAWA SGD7S Product Manual page 178

5.17 Setting the Origin of the Absolute Encoder
5.17.2 Setting the Origin of the Absolute Linear Encoder
Applicable Tools
The following table lists the tools that you can use to set the origin of the absolute linear
encoder and the applicable tool functions.
Digital Operator
SigmaWin+
Operating Procedure
Use the following procedure to set the origin of an absolute linear encoder.
1.
Click the
2.
Select Set Origin in the Menu Dialog Box.
The Set Origin Dialog Box will be displayed.
3.
Click the Continue Button.
4.
Click the Execute Button.
5-50
Tool
Fn020
Setup - Set Origin
Servo Drive Button in the workspace of the Main Window of the SigmaWin+.
Function Reference
Σ-7-Series Digital Operator Operating
Manual (Manual No.: SIEP S800001
33)
Operating Procedure on page 5-50