Installation Precautions - YASKAWA SGD7S Product Manual

3.1 Installation Precautions

3.1

Installation Precautions

Refer to the following section for the ambient installation conditions.
2.1.3 Specifications on page 2-6
 Installation Near Sources of Heat
Implement measures to prevent temperature increases caused by radiant or convection heat
from heat sources so that the ambient temperature of the SERVOPACK meets the ambient
conditions.
 Installation Near Sources of Vibration
Install a vibration absorber on the installation surface of the SERVOPACK so that the SERVO-
PACK will not be subjected to vibration.
 Other Precautions
Do not install the SERVOPACK in a location subject to high temperatures, high humidity, water
drops, cutting oil, excessive dust, excessive dirt, excessive iron powder, corrosive gasses, or
radioactivity.
3-2