YASKAWA SGD7S Product Manual page 510

13.1 List of Servo Parameters
13.1.2 List of Servo Parameters
Parameter
No.
Pn82D
*12
M2
13-38
Name
Option Field Allocations
2
4
BANK_SEL1 Allocation (Option)
0 Allocate bits 0 to 3 to BANK_SEL1.
1 Allocate bits 1 to 4 to BANK_SEL1.
2 Allocate bits 2 to 5 to BANK_SEL1.
3 Allocate bits 3 to 6 to BANK_SEL1.
4 Allocate bits 4 to 7 to BANK_SEL1.
5 Allocate bits 5 to 8 to BANK_SEL1.

n. X
6 Allocate bits 6 to 9 to BANK_SEL1.
7 Allocate bits 7 to 10 to BANK_SEL1.
8 Allocate bits 8 to 11 to BANK_SEL1.
9 Allocate bits 9 to 12 to BANK_SEL1.
A Allocate bits 10 to 13 to BANK_SEL1.
B Allocate bits 11 to 14 to BANK_SEL1.
C Allocate bits 12 to 15 to BANK_SEL1.
BANK_SEL1 Allocation Enable/Disable Selection
 
n. X 0 Disable BANK_SEL1 allocation.
1 Enable BANK_SEL1 allocation.
LT_DISABLE Allocation (Option)
 
n. X
0 to F The settings are the same as for the V_PPI allocations.
LT_DISABLE Allocation Enable/Disable Selection

n.X 0 Disable LT_DISABLE allocation.
1 Enable LT_DISABLE allocation.
Setting Setting Default
Range Unit Setting
0000 to
– 0000
1F1C
Continued from previous page.
Applicable When Classi-
Motors Enabled fication
After
All Setup
restart
Continued on next page.
Refer-
ence
*11