Table of Contents
Advertisement
2. Commissioning
Before the first start of operation you have to install the provided software
(on old Windows XP systems also the USB-driver has to be installed). Please
follow the installation instructions given by the software.
2.1 General Remarks
The Seunis measurement software was designed to make series measure-
ments and therefore the central element of the main window is a spreadsheet-
like table. For a better understanding, some regularly used terms are de-
fined below:
Sample
Sample List
(D)TTC =
(Differential)
Three-Term
Correction
12TC = Twelve
Term Correction
Measurement
Modes
2.2 Software Configuration File
Some specialized options & functionalities can be modified via the software
configuration file Seunis.config. The default location of the configuration
file can be found via Seunis in the Windows start menu. For proper use on
Describes the individual objects/devices under
test (DUT)
Collection of samples in the spreadsheet table
Error correction method, removes systematic
device & external cable/connector errors
Error correction method for full 2-port
S-parameter measurements. Only used if full
2-port measurement mode is available
The software is capable of measuring various
parameters (impedance, S11, etc.). These
functionalities are called measurement modes
T3SP-Series Operator's Manual
8
931776 RevB
Advertisement
Table of Contents
