Figure 4-11 Set Time And Date Pop-Up; Figure 4-12 Month Pop-Up - Teledyne BENTHOS UDB-9000 User Manual

UDB-9000 Universal Deck Box - UDB-9000-M (Portable) and UDB-9000-MR (Rack Mount) Configurations
4. Tap, or touch and hold, the up or
down arrow of the hours setting to
set the hour. The hours setting is
to the far left.
5. Tap, or touch and hold, the up or
down arrow of the minutes setting
to set the minute. The minutes
setting is to the right of the hours
setting.
6. If 24 hr. Time was not selected,
select AM or PM.
7. Touch the month setting.
8. A drop-down list opens as shown
in Figure 4-12.
9. Touch the desired month in the
drop-down list. If the month is
hidden, tap the up or down arrow
or drag the slider up or down to
show it.
10. Tap, or touch and hold, the left or
right arrow of the days setting to
set the day. The day setting is
immediately below the month
setting.
11. Tap, or touch and hold, the left or right arrow of the years setting to set
the year. The years setting is immediately below the days setting.
The correct day for the selected month, day and year is displayed above
the month setting.
12. Touch Set Time/Date to save the new time and date settings; touch Exit
to leave them as is.
The Set Time/Date pop-up closes.
4
Operation using the Touch Screen Display
Figure 4-11 Set Time and Date
Pop-Up

Figure 4-12 Month Pop-Up

4-9
General Setup