Field Calibration - Teledyne First Responder CG User Handbook Manual

FIELD CALIBRATION

Field calibration allows simple calibration to be carried out in
the field without the use of additional test equipment. Other
calibration procedures require the use of the Teledyne GMI
Manual Calibration software or the Workshop System.
In Field Calibration Mode (FCM) the buttons perform the
functions indicated in Figure B-1.
CGI
CSM
PURGE
TRAC
symbols key:
Button 1
Button 2
Button 3
Button 4
single press
double press
press & hold
Fig. B-1 Button Functions
B
B-1