Remote Channel Settings - R&S SMB100A Operating Manual

®
R&S SMB100A
Screen Saver Active
Activates/deactivates the screen-save mode of the display.
If activated, the display including backlight is completely switched off after the elapse of
the "Wait Time" when no entries via front panel, external mouse or external keyboard
are made.
This mode is recommended for preserving the display especially if the instrument is
exclusively operated via remote control.
Remote command:
:DISPlay:PSAVe[:STATe]
Wait Time
Enters the idle time that must elapse before the display lamp is shut off when no
entries are made.
Remote command:
:DISPlay:PSAVe:HOLDoff
Toggle Summary Screen
Activates/deactivates the magnified frequency and level indication. If activated, the fre-
quency and level indication covers the complete display.
Remote command:
n.a.
GUI Language
Selects the language of the graphical user interface.
Remote command:
n.a.
Layout (USB Keyboard Settings)
Selects the keyboard layout for the selected keyboard language.
The assignment of some keys depends on the selected layout and language.
Remote command:
:KBOard:LAYout
:KBOard:LANGuage
5.2.3.14

Remote Channel Settings

The "Remote Channel Settings" dialog provides access to the settings for remote con-
trol. The dialog is opened using the SETUP or MENU key under "Remote".
► To access this dialog, press the SETUP or MENU key and select "Remote >
GPIB,...".
Operating Manual 1407.0806.32 ─ 21
on page 292
on page 292
on page 302
on page 302
Instrument Function
General Instrument Settings
108