Date And Time - R&S SMB100A Operating Manual

®
R&S SMB100A
manual control, the R&S SMB provides you with another possibility to shut the instru-
ment down or to reboot the system.
► To access the required settings, select "Setup > Environment > Shut Down".
Remote control commands:
●
:SYSTem:SHUTdown
●
:SYSTem:REBoot
●
see also
5.2.3.11

Date and Time

The R&S SMB uses an internal real time clock to determine the date and time. It
adjusts the time and date to the timezone of your location automatically, by providing a
selection list of continents and cities.
The instrument records the time whenever you create or modify files on your instru-
ment or you use timed licences.
To access the required settings:
► Select "Setup > Environment > Date/Time" via the SETUP or MENU key.
The "Date / Time" dialog contains the time and data settings of the operating sys-
tem.
The parameters "Date" and "Time" are protected to prevent accidental changes.
To enable editing, unlock protection level 1, see
on page 113.
Date
Displays the date set in the operating system in the format [dd.mm.yyyy].
Remote command:
:SYSTem:DATE
Time
Displays the time set in the operating system in the format [hh.mm.ss].
The time setting corresponds to the selected
Operating Manual 1407.0806.32 ─ 21
on page 445
on page 444
on page 444
:SYSTem:RESTart
on page 445
Instrument Function
General Instrument Settings
Chapter 5.2.3.17, "Protection",
Time Zone.
103