Nrp-Z Info/Update - R&S SMB100A Operating Manual

®
R&S SMB100A
License Registration
If your purchased license is delivered unregistered, you must register it before you can
activate the option.
For detailed information about the license registration, refer to the installation instruc-
tions provided with the option (Supplement A) and the documentation of the online tool
"Manage Licenses" (https://extranet.rohde-schwarz.com/service).
Only if the R&S SMB is equipped with an older firmware version, a firmware update
prior to enabling the software option may be required. The information on the valid
firmware versions for the purchased software option is provided together with the
option.
The firmware update is described in the service manual, chapter 4.
Device ID
Displays the instrument specific identification number. The device ID is an unique
string with the following structure:
<stock number>-<serial number>-<checksum>
Enter License Key
Type here the license key provided with the option.
For license keys delivered as a file, use
Import License Key from File...
Opens a dialog for selecting the file with the license key.
Export Deactivation Response to File...
Exports the generated deactivation response key to a file and opens a file manage-
ment dialog to save the file. This key is required during the unregistration process.
Status Information
Displays status information.
5.2.3.5

NRP-Z Info/Update

The "NRP-Z Info/Update..." dialog covers information on connected power sensors,
like serial number, revision state and features of the particular sensor. You can directly
perform an update of the sensor firmware.
► To access this dialog, select "Setup > System > NRP-Z Info/Update...".
Operating Manual 1407.0806.32 ─ 21
General Instrument Settings
Import License Key from
Instrument Function
File....
97