Mmemory:mdirectory; Mmemory:move; Mmemory:msis - R&S SMB100A Operating Manual

®
R&S SMB100A
<file_name>
Example:
Usage:
Manual operation:
:MMEMory:MDIRectory <Directory>
Creates a subdirectory for mass memory storage in the specified directory. If no direc-
tory is specified, a subdirectory is created in the default directory. This command can
also be used to create a directory tree.
Setting parameters:
<Directory>
Example:
Usage:
Manual operation:
:MMEMory:MOVE <SourceFile>, <DestinationFile>
Moves an existing file to a new location or, if no path is specified, renames an existing
file.
Setting parameters:
<SourceFile>
<DestinationFile>
Example:
Usage:
Manual operation:
:MMEMory:MSIS <Msis>
Defines the drive or network resource (in the case of networks) for instruments with
windows operating system, using msis (MSIS = Mass Storage Identification String).
Note: Instruments with Linux operating system ignore this command, since Linux does
not use drive letter assignment.
Usage:
Operating Manual 1407.0806.32 ─ 21
String parameter to specify the file name with extension
*.savrcltxt.
See "Storing and Loading Current Settings"
Setting only
See "Recall" on page 129
string
String parameter to specify the new directory.
See "Working with Files and Directories"
Event
See "Create New Directory"
string
String parameter to specify the name of the file to be moved.
string
String parameters to specify the name of the new file.
See "Working with Files and Directories"
Event
SCPI confirmed
See "Rename " on page 132
SCPI confirmed
Remote Control Commands
MMEMory Subsystem
on page 304.
on page 304.
on page 132
on page 304.
310