R&S SMB100A Operating Manual page 148

®
R&S SMB100A
To access the file system of the R&S SMB via ftp
If the R&S SMB is connected to a LAN and the required configurations are completed,
you can use File Transfer Protocol (ftp) to access the file system and to transfer files
from and to the instrument.
1. Connect the instrument and the remote PC to a LAN.
2. Find out the "IP Address" of the instrument:
a) Select "Setup > Environment > Network Settings".
b) Write down the "IP Address" of the instrument, e.g. 10.113.10.105.
3. On the remote PC, start the Windows Explorer.
4. In the address field, enter ftp://<"IP Address" of the Instrument>, e.g.
ftp://10.113.10.105
A log on dialog opens and requests a password.
Tip: Default password. The FTP file access use the user instrument with default
password instrument.
It is highly recommended that you change the user password in the "Security" dia-
log before connecting the instrument to the network!
See
5. Enter the password to access the /var/user/share directory.
You can access the files in the /var/user/ directory, perform standard function
like creating directory, etc.
6. Open the /var/user/share directory and create a new directory, e.g. testftp.
7. On the instrument, press the FILE key and open the /var/user/share directory.
The dialog displays the testftp dircetory.
Operating Manual 1407.0806.32 ─ 21
Chapter 5.2.3.18, "Security",
General Instrument Settings
on page 114.
Instrument Function
133