Table of Contents
Advertisement
®
R&S
SMB100A
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh?
Queries the month in the date part in the automatic filename.
Return values:
<Month>
Example:
Usage:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe <State>
Activates the usage of the month in the automatic filename.
Parameters:
<State>
Example:
Manual operation:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?
Queries the number in the automatic filename. The number is assigned in such a way
that always the lowest possible value for a unique filename within the selected path is
used.
On initially switching on the device, the number is reset to the lowest possible value.
Starting with number 0 the output directory is scanned for existing files. As long as files
with the same name are existing, the number is incremented by 1. The number is auto-
matically set to a number so that the resulting filename is unique within the selected
path. The current number is not saved in the save recall file but is temporarily stored
within the database. On subsequent saves, the number is incremented.
Return values:
<Number>
Example:
Usage:
Manual operation:
Operating Manual 1407.0806.32 ─ 21
integer
Range:
1 to 12
*RST:
1
HCOP:FILE:AUTO:MONT?
Queries the month in the date part in the automatic filename.
Query only
0 | 1 | OFF | ON
*RST:
1
HCOP:FILE:AUTO:MONT:STAT OFF
Deactivates the usage of the month in the automatic filename.
See
"File Options"
on page 123
integer
Range:
0 to 999999
*RST:
0
HCOP:FILE:AUTO:NUMB?
Queries the number in the automatic filename.
Query only
See
"File Options"
on page 123
Remote Control Commands
HCOPy Subsystem
299
Advertisement
Chapters
Table of Contents
