R&S SMB100A Operating Manual page 130

®
R&S SMB100A
Changing the password for the operating system or the security password requires that
you enter the old password, the new password and that you confirm the new pass-
word.
To assign the password, press the "Accept" button. This action can not be undone!
Keep also in mind, that security settings are never reset, even if you perform a factory
preset.
► To access this dialog, press the SETUP or MENU key and select "Protection " >
"Security".
The "Security" dialog comprises the parameters for configuring the passwords, as
well as the security settings of the mass storage and the LAN services.
The settings in this dialog will not be assigned until you enter the
and confirm with the
User Name
Indicates the user name used for access to the Linux operating system.
The user name and password are required for remote access to the instrument via
VNC, FTP or SAMBA.
Change User Password
Allows you to change and confirm the user password.
Operating Manual 1407.0806.32 ─ 21
Accept button.
Instrument Function
General Instrument Settings
Security Password
115