®
R&S
SMB100A
●
●
●
●
●
2.8.2.1
IP Configuration
The "IP Configuration" page displays all mandatory LAN parameters.
The "IP Address Mode" selects a configuration mode for the IP address of the
R&S SMB. With static configuration, the entered IP address, subnet mask, and default
gateway are used. With dynamic configuration, DHCP or dynamic link local addressing
(automatic IP) are used to obtain the instrument IP address.
See
2.8.2.2
Advanced LAN Configuration
The "Advanced Config" page provides LAN settings that are not declared mandatory
by the LXI standard.
Operating Manual 1407.0806.32 ─ 21
Configuration...................................................................................................... 48
Configuration..................................................................................48
Client...............................................................................................................49
Control............................................................................................................ 50
Trace................................................................................................ 51
Chapter 2.6.2, "Assigning the IP
Address",
on page 36.
Preparing for Use
LXI Configuration
48