Table of Contents
Advertisement
®
R&S
SMB100A
Example:
Usage:
Manual operation:
:SYSTem:SERRor?
This command returns a list of all errors existing at the time when the query is started.
This list corresponds to the display on the info page under manual control.
Return values:
<StaticErrors>
Example:
Usage:
:SYSTem:DLOCk <DispLockStat>
Disables the display, or enables it again (OFF).
The command disables also the front panel keyboard of the instrument including the
LOCAL key.
Parameters:
<DispLockStat>
Example:
Manual operation:
:SYSTem:KLOCk <State>
Keyboard LOCk disables the front panel keyboard of the instrument including the
LOCAL key, or enables it again (OFF).
The command disables also the front panel keyboard of the instrument including the
LOCAL key.
Parameters:
<State>
Operating Manual 1407.0806.32 ─ 21
SYST:ERR?
queries the oldest entry in the error queue.
Response: 0, 'no error'
No errors have occurred since the error queue was last read out.
Query only
See
"History"
on page 70
string
SYSTem:SERRor?
queries all errors existing in the error queue.
Response: -221, 'Settings conflict', 153,
'Input voltage out of range'
the two returned errors have occurred since the error queue was
last queried.
Query only
0 | 1 | OFF | ON
*RST:
0
SYST:DLOC ON
locks the display. To unlock the display SYST:DLOC OFF.
See
"User Interface"
on page 118
0 | 1 | OFF | ON
*RST:
0
Remote Control Commands
SYSTem Subsystem
436
Advertisement
Chapters
Table of Contents
