Table of Contents
Advertisement
®
R&S
SMB100A
Old Password ← Change User Password
Enters the current user password. The default password is "instrument".
Note: It is highly recommended to change the default user password before connect-
ing the instrument to the network.
New Password ← Change User Password
Enters the new user password.
Confirm Password ← Change User Password
Confirms the new user password by reperating.
Note: The new password will not be assigned until you select the
button.
Change Password ← Change User Password
Changes the user password accordingly.
Note: Keep in mind, that a changed password is never reset, even if you perform a
factory preset.
Change Security Password
Enables you to change and confirm the security password.
Old Password ← Change Security Password
Enters the currently used security password. The default password is '123456'.
Note: It is highly recommended to change the default security password before con-
necting the instrument to the network.
The security password is required when changing the status of the USB and LAN inter-
face.
New Password ← Change Security Password
Enters the new security password.
The security password may contain decimal characters only.
Confirm Password ← Change Security Password
Confirms the new password by repeating.
Note: The new password will not be assigned until you select the
button.
Change Password ← Change Security Password
Changes the password accordingly.
Note: Keep in mind, that a changed password is never reset, even if you perform a
factory preset.
LAN Services
Opens the "LAN Services" dialog for individually enabling or disabling the available
LAN interface services.
Operating Manual 1407.0806.32 ─ 21
Instrument Function
General Instrument Settings
Change Password
Change Password
116
Advertisement
Chapters
Table of Contents
