R&S SMB100A Operating Manual page 431

®
R&S SMB100A
Parameters:
<Deviation>
Example:
Manual operation:
[:SOURce]:STEReo:SOURce <Source>
Selects the source for the audio signal.
Parameters:
<Source>
Example:
Options:
Manual operation:
[:SOURce]:STEReo:STATe <State>
Activates/deactivates stereo modulation.
Parameters:
<State>
Example:
Options:
Manual operation:
Operating Manual 1407.0806.32 ─ 21
integer
Range: 0 to 10 kHz
*RST: 2 kHz
SOUR:STER:RDS:DEV 2kHz
sets the RDS signal deviation according to standard.
See "RDS Deviation - Stereo Modulation"
OFF | LREXt | SPEXt | LFGen
OFF
No audio signal is provided, ARI and RDS signal can be gener-
ated separately.
LREX
The external audio signal is feed in via the analog L and R
inputs.
SPEX
The external audio signal is feed in via the digital S/P DIF inter-
face
LFG
The audio stereo signal is internally generated by the LF genera-
tor.
*RST: LREXt
STER:SOUR LFG
The internal LF generator is used as modulation source for the
audio signal.
R&S SMB-B5
See "Audio Source - Stereo Modulation"
0 | 1 | OFF | ON
*RST: OFF
STER:STAT ON
activates generation of stereo signal.
R&S SMB-B5
See "State - Stereo Modulation "
Remote Control Commands
SOURce Subsystem
on page 217
on page 213
on page 213
416