R&S SMB100A Operating Manual page 126

®
R&S SMB100A
► To access this dialog, press the SETUP or MENU key and select "Remote > Instru-
ment Emulations".
The "Instrument Emulations" dialog enables you to emulate a remote control com-
mand set of several other signal generators.
The remote commands required to remotely configure the emulation settings are
described in
Language
Selects the instrument whose remote command set is emulated by the R&S SMB.
Remote command:
:SYSTem:LANGuage
Mode
Selects the way the instrument identification is performed.
"Automatic"
"User Defined"
Remote command:
:SYSTem:IDENtification
Set to default
Enables you to reset the *IDN and *OPT strings in user defined mode, see
on page 111 .
The default strings vary depending on the selected emulation mode (Language)
IDN String
Indicates the identification string of the instrument when queried with the common
command *IDN?.
To assign a user defined identification string, select
Remote command:
*IDN?
OPT String
Indicates the option string of the instrument as queried with the common command
*OPT?.
Operating Manual 1407.0806.32 ─ 21
Chapter 7.15, "SYSTem
on page 443
Sets the "IDN String" and the "OPT String" automatically for the
instrument selected with the parameter Language.
Enables you to define the "IDN String" and the "OPT String" for the
instrument selected with the parameter Language.
on page 281
Subsystem", on page 433.
on page 443
Mode
Instrument Function
General Instrument Settings
"Mode"
"User defined".
111