R&S SMB100A Operating Manual page 132

®
R&S SMB100A
Enable LAN Interface ← LAN Services
Enables the LAN interface in general, and thus provides remote access via all
unlocked services.
Note: The activated LAN services will not be assigned until you enter the
Password
Enable LAN Services individually ← LAN Services
Enables or disables the following interface services individually.
"SCPI over LAN"
"VNC"
"SSH"
"HTTP"
"FTP"
"SMB (Samba)"
"Avahi (Zeroconf)"
"Software Update"
Operating Manual 1407.0806.32 ─ 21
and confirm with Accept.
activates access over LAN to remotely control the instrument using
SCPI (Standard Commands for Programmable Instruments) com-
mands.
activates access via VNC (Virtual Network Computing) interface, a
graphical desktop sharing system that uses RFB protocol to remotely
control the instrument.
activates access via SSH (Secure Shell), a network protocol for
secure data communication.
activates access via HTTP (Hyper Text Transfer Protocol), the appli-
cation protocol for hypermedia information systems.
activates access via FTP (File Transfer Protocol), used to transfer
files from a host to the instrument and vice versa.
activates access to SMB (Server Message Block), used for providing
shared access to files, printers and serial ports of a network.
activates Avahi, a service for automatic configuration of the instru-
ment in a network environment.
allows updating the instrument firmware via the LAN interface.
For more information on this topic see the release notes of the instru-
ment, provided on the Internet at the download site or the Rohde &
Schwarz Signal Generator home page.
Instrument Function
General Instrument Settings
Security
117