Examples - R&S SMB100A Operating Manual

®
R&S SMB100A
Table 7-1: List of the automatically assigned file extensions in the instrument
Function
Instrument State
"User Correction"
"List Mode"
"Pulse Train List"
SMZ Settings
NRP Settings

7.10.3 Examples

In these examples, the current instrument setting is stored in the file
test.savrcltxt in the directory /var/user/..
Storing and Loading Current Settings
1. Store the current setting in an intermediate memory with the number 4. This setting
can be called using command *RCL and the associated number of the memory, for
example *RCL 4.
*SAV 4
2. To store the settings in a file in a specific directory, specify the complete path.
MMEM:STOR:STAT 4,"/var/user/test.savrcltxt"
3. To store the settings in a file in the default drive, set the default drive and specify
only the file name.
MMEM:CDIR '/var/user/'*SAV 4
MMEM:STOR:STAT 4,"test.savrcltxt"
4. Load the file test.savrcltxt in the user directory.
MMEM:LOAD:STAT 4,'/var/user/test.savrcltxt'
5. Activate the instrument setting of the file test.savrcltxt.
*RCL 4
Working with Files and Directories
1. Read out all files in the specified directory.
MMEM:CAT? '/usb/user'
Operating Manual 1407.0806.32 ─ 21
List type Contents
Settings Instrument settings
List User-defined level correction values
Export Data
List User-defined frequency/level value pairs
Export Data
User-defined offtime/ontime/repetition values
Settings Data (firmware) of a connected SMZ frequency
multiplier
Settings NRP Settings
Remote Control Commands
MMEMory Subsystem
File suffix
*.savrcltxt
*.uco
*.txt or *.csv
*.lsw
*.txt or *.csv
*.pulstrn
*.efmfirm
*.nrp
304