R&S SMB100A Operating Manual page 139

®
R&S SMB100A
"Path..."
Remote command:
:HCOPy:FILE[:NAME]:AUTO:DIRectory
:HCOPy:FILE[:NAME]:AUTO?
"Clear Path"
Remote command:
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar
"Prefix, Year,
Month, Day"
Remote command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe
"Current Auto
Number"
Remote command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?
"Resulting File
Name"
Remote command:
:HCOPy:FILE[:NAME]:AUTO:FILE?
Operating Manual 1407.0806.32 ─ 21
Selects the directory.
Note: To select the destination path, you have to specify a file name
as well. Otherwise an error message is displayed and the selection is
canceled.
Directory, path and file name are displayed in the infoline right to the
"Path" button.
on page 297
Deletes all image files with extensions bmp, img, png, xpm and csv
in the directory set for automatic naming.
Before deleting the image files a warning message is displayed
requiring the confirmation.
Determines the rules for "Automatic Naming".
Per default, the automatically generated file name is composed of:
<Path>/<Prefix><YYYY><MM><DD><Number>.<Format>, where
Y, M and D mean Year, Month, Day; Number is the "Current Auto
Number".
You can deactivate/activate each component separately.
The "Resulting File Name" indicates the current file name syntax.
Indicates the number which is used in the automatically generated file
name.
Note: When initially switching on the instrument the number is reset
to the lowest possible value. Starting with number 0 the output direc-
tory is scanned for already existing files. As long as files with the
same name are existing the number is increased by 1. The number is
automatically set so that the resulting file name will be unique within
the selected path. The current number is not in the save/recall file but
will be temporarily stored within the database. At following save oper-
ations the number is increased.
Indicates the automatically generated file name.
General Instrument Settings
on page 297
on page 297
on page 300
on page 300
on page 300
on page 299
on page 298
on page 299
on page 297
Instrument Function
124