R&S SMB100A Operating Manual page 157

®
R&S SMB100A
Settings:
–
●
External f
If you have a clean external reference signal with 10 MHz frequency, you can
directly pass it to the output. The signal quality remains the same.
Figure 5-2: Synchronizing instruments by means of an externally applied reference signal having
Settings:
–
–
Set the additionally provided parameters, as for example the synchronization band-
width according to the requirements of the application.
●
External f
If you have an external reference signal with 5 or 10 MHz, you can directly pass it
to the output. The signal quality remains the same.
Figure 5-3: Synchronizing a subsequent instrument an externally applied reference frequency of
Settings:
–
–
Operating Manual 1407.0806.32 ─ 21
Source: "Internal"
= 10 MHz (10 MHz REF OUT)
ref
10 MHz
Source: "External"
External Reference Frequency: "10 MHz"
= 5/10 MHz (5/10 MHz REF OUT)
ref
5 or 10 MHz
Source: "External"
External Reference Frequency: "5 or 10 MHz"
Instrument Function
RF Block
142