Hardcopy Options - R&S SMB100A Operating Manual

®
R&S SMB100A
Automatic Naming
Activates automatic generation of the file name. Automatic naming is configured in the
"Options..." sub dialog , see
Remote command:
:HCOPy:FILE[:NAME]:AUTO:STATe
File Info
Indicates the file name. The file name can be entered either manually via the file man-
ager (button "File...") or generated automatically (Automatic naming checkbox). Auto-
matic naming is configured in the "Options..." submenu.
Remote command:
:HCOPy:FILE[:NAME]
:HCOPy:FILE[:NAME]:AUTO:FILE?
5.2.5.2

Hardcopy Options

This section describes the "Hardcopy Options" dialog.
File Options
Dialog for setting the file parameters.
"Format"
Remote command:
:HCOPy:IMAGe:FORMat
:HCOPy:DEVice:LANGuage
"Automatic
Naming"
Operating Manual 1407.0806.32 ─ 21
"File Options"
on page 296
Selects the output file format, for example *.bmp,
*.jpg*.xpm*.png.
on page 301
on page 296
If enabled, creates the output filenames automatically according to
rules following the activated components.
General Instrument Settings
on page 123.
on page 301
on page 297
Instrument Function
123