Output Subsystem; Mmemory:rdirectory; Mmemory:store:state - R&S SMB100A Operating Manual

®
R&S SMB100A
:MMEMory:RDIRectory <Directory>
Removes an existing directory from the mass memory storage system. If no directory
is specified, the subdirectory with the specified name is deleted in the default directory.
Setting parameters:
<Directory>
Example:
Usage:
:MMEMory:STORe:STATe <savrcl_state_nr>, <file_name>
Stores the current instrument setting in the specified file.
The instrument setting must first be stored in an internal memory with the same num-
ber using the common command *SAV.
Setting parameters:
<savrcl_state_nr>
<file_name>
Example:
Usage:
Manual operation:

7.11 OUTPut Subsystem

The OUTPut system contains the commands which set the properties of the RF output
connector.
The properties of the LF output connector are set in the
system.
:OUTPut<hw>:AFIXed:RANGe:LOWer?
:OUTPut<hw>:AFIXed:RANGe:UPPer?
:OUTPut<hw>:ALC:SEARch:MODE
:OUTPut<hw>:AMODe
:OUTPut<hw>:FILTer:AUTO
:OUTPut<hw>:FILTer[:LPASs]:STATe
:OUTPut<hw>:IMPedance?
:OUTPut<hw>:PROTection:CLEar
:OUTPut<hw>:PROTection:TRIPped?
:OUTPut<hw>[:STATe]
:OUTPut<hw>[:STATe]:PON
Operating Manual 1407.0806.32 ─ 21
string
String parameter to specify the directory to be deleted.
See "Working with Files and Directories"
Event
Corresponds to the specific <number> defined with the *SAV
command, e.g. *SAV 4.
String parameter to specify the file name with extension
*.savrcltxt.
See "Storing and Loading Current Settings"
Event
See "Save" on page 128
........................................................................... 312
............................................................................312
.................................................................................312
................................................................................................... 313
........................................................................................... 313
..............................................................................313
.............................................................................................314
................................................................................... 314
..............................................................................314
................................................................................................... 314
........................................................................................... 315
Remote Control Commands
OUTPut Subsystem
on page 304.
on page 304.
SOURce:LFOutput Subsystem
311