R&S SMB100A Operating Manual page 264

Rf and microwave signal generator

Hide thumbs Also See for SMB100A:

Table of Contents

a) In the menu bar, select "RsVisaConfig".

b) In the toolbar, select "+" to access the "VISA Rexource String Composer".

c) Fill in the "Alias" name, the "VISA Resource String" and the "Device IP Address

d) Close the dialog.

9. In the main window, select "Connect".

R&S VISA establishes the connection to the R&S SMB.

Now you can send settings to configure the instrument and receive its responses.

Operating Manual 1407.0806.32 ─ 21

or host name" as shown in the figure, and confirm with "OK".

The "Alias" name is assigned to the instrument.

The R&S SMB is now registered in the program and can be addressed via the

resource string or alias name.

Remote Control Basics

Starting a Remote Control Session

Chapters

Table of Contents