Connecting A Remote Pc Via Lan - R&S SGU100A Getting Started

®
R&S SGU100A
Installing a new software version
Administrator rights are necessary for installation and starting.
1. Download the R&S SGMA-GUI software.
2. In Windows Explorer, double-click SGMA-GUI_V.VV.VVV.VVV.exe. Follow
the instructions.
After the installation of the R&S SGMA-GUI software, two icons will be shown in
your Windows menu: one is the standard version and one for which the remote
command of the software through SCPIs is disabled. The SCPI disabled version
allows you to install and use the R&S SGMA-GUI on other instruments, without
interfering with the remote control of the host instrument.
Start the version that is required for your application.
Uninstalling an old software version
An uninstallation of a previous version of the SW can be performed before the
installation of the new one, but this is not mandatory.
► To uninstall this version, go to "Start > Settings > Control Panel > Add/
Remove Programs" and select the entry SGMA-GUI_V.VV.VVV.VVV.
The script file identifies and removes all currently installed R&S SGMA-GUI
software items.
2.3.2

Connecting a Remote PC via LAN

The R&S SGU is equipped with a network interface and can be connected to an
Ethernet LAN (local area network). The interface can be used, for example:
Getting Started 1418.2070.02 ─ 08
Connecting an External PC and Devices
Preparing for Use
20