R&S SMB100A Operating Manual page 379

®
R&S SMB100A
Example:
Usage:
Manual operation:
[:SOURce<hw>]:LIST:DEXChange:MODE <Mode>
Selects if list mode lists should be imported or exported. Depending on the selection
here, the file select command defines either the source or the destination for list mode
lists and ASCII files.
Parameters:
<Mode>
Example:
Manual operation:
[:SOURce<hw>]:LIST:DEXChange:SELect <Filename>
Selects the list mode list to be imported or exported.
The list mode files are stored with the fixed file extensions *.lsw in a directory of the
user's choice. The directory applicable to the commands is defined with the command
MMEMory:CDIR. A path can also be specified in command SOUR:LIST:DEXC:SEL, in
which case the files are stored or loaded in the specified directory.
Parameters:
<Filename>
Operating Manual 1407.0806.32 ─ 21
LIST:DEXC:MODE IMP
determines that ASCII files with frequency and level value pairs
are imported into list mode lists.
LIST:DEXC:AFIL:SEL '/var/list.csv'
selects the ASCII file list.csv for import.
LIST:DEXC:SEL '/var/list_imp'
determines the destination file list_imp.
LIST:DEXC:EXEC
imports the ASCII file data into the list mode file.
Event
See "Import / Export - List Mode"
IMPort | EXPort
*RST: IMPort
LIST:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into list mode lists.
LIST:DEXC:AFIL:SEL '/var/list.csv'
selects that ASCII file list.csv is imported.
LIST:DEXC:SEL '/var/list_imp'
selects that the ASCII file list.csv is imported into list mode
list list_imp.
See "Mode - List Mode"
<list_name>
Remote Control Commands
SOURce Subsystem
on page 195
on page 194
364