System:communicate:gpib:resource; System:communicate:network:resource; System:communicate:hislip:resource; System:communicate:usb:resource - R&S SMB100A Operating Manual

®
R&S SMB100A

:SYSTem:COMMunicate:GPIB:RESource?

Queries the visa resource string for remote control via the GPIB interface.
To change the GPIB address, use the command
SELF]:ADDRess.
Return values:
<Resource>
Example:
Usage:
Manual operation:

:SYSTem:COMMunicate:NETWork:RESource?

Queries the VISA resource string, used for remote control of the instrument with
VXI-11 protocol.
Return values:
<Resource>
Example:
Usage:
Manual operation:

:SYSTem:COMMunicate:HISLip:RESource?

Queries the VISA resource string, used for remote control of the instrument with
HiSLIP protocol.
Return values:
<Resource>
Example:
Usage:
Manual operation:

:SYSTem:COMMunicate:USB:RESource?

Queries the visa resource string for remote control via the USB interface.
Return values:
<Resource>
Operating Manual 1407.0806.32 ─ 21
string
SYSTem:COMMunicate:GPIB:RESource?
queries the VISA resource string.
Response: "GPIB::28::INSTR"'
Query only
See "Visa Resource Strings"
string
SYSTem:COMMunicate:NETWork:RESource?
Response: "TCPIP::192.1.2.3::INSTR"
Query only
See "Visa Resource Strings"
string
SYSTem:COMMunicate:HISLip:RESource?
Response: "TCPIP::192.1.2.3::hislip0::INSTR"
Query only
See "Visa Resource Strings"
string
Remote Control Commands
SYSTem Subsystem
:SYSTem:COMMunicate:GPIB[:
on page 110
on page 110
on page 110
441