Configuration For Manual Remote Control Via Windows Remote Desktop Connection - R&S AFQ100A Operating Manual

R&S AFQ100A
Configuration for Manual Remote Control via Windows Remote
Desktop Connection
The instrument is operated with the aid of the Windows program Remote Desktop Connection which
is provided free-of-charge by Microsoft in the download area of the Internet (http://www.microsoft.com).
Manual remote control of the modulation generator via Remote Desktop is possible under the following
conditions:
The Windows 95 operating system or higher and the Remote Desktop Connection program are
installed on the external PC and
a LAN interface is configured for the network.
The modulation generator and PC are linked via a LAN.
The Remote Desktop Connection is enabled on the R&S AFQ
R&S AFQ data (IP address or computer name of the R&S AFQ in the network) is entered in the
Remote Desktop Connection program of the external PC.
Login on the external computer for the R&S AFQ was carried out with the correct user name
(instrument) and the correct password (instrument).
NOTICE Risk of unauthorized access!
After activation of the remote desktop, any user on the network who knows the
computer name and login data of the vector modulation generator can access this
R&S AFQ. Even after cutting it, the connection is still enabled and the R&S AFQ can
be accessed any time.
To disable the connection, the remote desktop must be deactivated on the
R&S AFQ.
1401.3078.62
Manual Remote Control via an External Controller
1.35 E-3