R&S SMB100A Operating Manual page 380

®
R&S SMB100A
Example:
Manual operation:
[:SOURce<hw>]:LIST:DWELl <Dwell>
Sets the dwell time. The R&S SMB generates the signal with the frequency / power
value pairs of each list entry for that particular period.
Parameters:
<Dwell>
Example:
Manual operation:
[:SOURce<hw>]:LIST:FREE?
Queries on the free storage space for list mode lists.
Return values:
<Free>
Example:
Usage:
Response: 2147483647;1
[:SOURce<hw>]:LIST:FREQuency <Frequency>
Fills the FREQuency column of the selected list with data.
*RST does not affect data lists.
Operating Manual 1407.0806.32 ─ 21
LIST:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into list mode lists.
LIST:DEXC:AFIL:SEL '/var/list.csv'
selects that ASCII file list.csv is imported.
LIST:DEXC:SEL '/var/list_imp'
selects that the ASCII file list.csv is imported into list mode
list list_imp.
See "Select Destination / Source - List Mode"
float
Range: 7E-4 to 100
Increment: 1E-4
*RST: 15E-3
LIST:DWEL 15
each setting in the list is retained for 15 ms.
See "Dwell Time - List Mode"
integer
Range: 0 to INT_MAX
*RST: 0
LIST:FREE?
Query only
Remote Control Commands
SOURce Subsystem
on page 195
on page 190
365