Status Reporting System; Hierarchy Of The Status Registers - R&S SMB100A Operating Manual

®
R&S SMB100A
3. Poll the operation complete state periodically (by means of a timer) using the
sequence: *OPC; *ESR?
A return value (LSB) of 1 indicates that the overlapped command has finished.

6.5 Status Reporting System

The status reporting system stores all information on the current operating state of the
instrument, and on errors which have occurred. This information is stored in the status
registers and in the error queue.
You can query both with the commands of the

6.5.1 Hierarchy of the Status Registers

The
(ascending from left to right).
Operating Manual 1407.0806.32 ─ 21
Figure 6-1 shows the hierarchical structure of information in the status registers
Remote Control Basics
Status Reporting System
STATus Subsystem.
269