R&S SMB100A Operating Manual page 175

Rf and microwave signal generator

Hide thumbs Also See for SMB100A:

Table of Contents

"Frequency /

"Insert Row"

"Insert Range"

Operating Manual 1407.0806.32 ─ 21

Enters the frequency to which the level correction value applies.

Note: The "Fill..." function allows to automatically enter any number

of frequencies with freely selectable range and increment.

Using the "Fill With Sensor" function of the "Edit" sub menu requires

only the entry of the frequency values. The level values are automati-

cally acquired by the connected power sensor.

Enters the level correction value to which the specified frequency

applies. The values can be entered manually or automatically with the

"Fill With Sensor" function (available in the "Edit" sub menu).

Selects row for editing.

If Goto row is selected, a window opens for entering the requested

Calls a selection of possible actions described below.

Insert a new row before the marked row.

Insert new rows before the marked row. The number of rows to be

inserted can be defined in an entry window.

Opens a sub menu for defining a set of list values to be automatically

entered in the ucor list (see

on page 162).

Instrument Function

"Filling the Correction List automatically"

Chapters

Table of Contents