R&S SMB100A Operating Manual page 133

®
R&S SMB100A
USB Storage
Activates the access to external USB storage media.
This setting has no effect on a mouse or a keyboard, connected via USB.
Note: The setting will not be assigned until you enter the
firm with Accept.
Write Nonvolatile Memory
Acitivates write protection on the file system to prevent modification or erasure of val-
uable data.
Note: The setting will not be assigned until you enter the
with Accept, and reboot the instrument.
Annotation Frequency
Enables/disables the display of the currently used frequency in the header of the
instrument.
Note: The setting will not be assigned until you enter the
firm with Accept.
Remote command:
:DISPlay:ANNotation:FREQuency
Annotation Amplitude
Enables/disables the display of the currently selected level in the header of the instru-
ment.
Note: The setting will not be assigned until you enter the
firm with Accept.
Remote command:
:DISPlay:ANNotation:AMPLitude
User Interface
Allows you to lock the manual of the controls of the instrument, and to hide even the
entire display.
The setting requires the entry of the security password 123456 and is only accepted
after the "Accept" button is pressed.
Tip: Section
describes how you can unlock the control elements and the user interface.
"Enabled"
"VNC Only"
Operating Manual 1407.0806.32 ─ 21
"Enabling a locked user interface for manual operation"
Enables the display and all controls for the manual operation of the
instrument.
Locks the keys at the front panel and externally connected keyboard
and mouse.
The display on the screen remains and shows the current settings
and changes.
Unlocking is possible via VNC or turning off and on again.
General Instrument Settings
Security Password
Security
Security Password
on page 291
Security Password
on page 290
Instrument Function
and con-
Password, confirm
and con-
and con-
on page 119
118