®
R&S
SMB100A
:SYSTem:SHUTdown
Shuts down the instrument.
Usage:
:SYSTem:STARtup:COMPlete?
Queries if the startup of the instrument is completed.
Return values:
<Complete>
Example:
Usage:
:SYSTem:DISPlay:UPDate <Update>
Switches the update of the display on/off. A switchover from remote control to manual
control always sets the status of the update of the display to ON.
Parameters:
<Update>
Example:
Manual operation:
:SYSTem:DATE <Year>, <Month>, <Day>
Queries or sets the date for the instrument-internal calendar.
This parameter is protected, in order to prevent accidental changes.
It can be accessed with protection level 1, see
on page 444.
Parameters:
<Year>
<Month>
<Day>
Operating Manual 1407.0806.32 ─ 21
Event
0 | 1 | OFF | ON
*RST:
0
SYST:STAR:COMP
Response: 1
The startup of the instrument is completed.
Query only
0 | 1 | OFF | ON
*RST:
ON
SYST:DISP:UPD OFF
switches update of displayed parameter values off.
See
"Display Update is On/Off"
<year>,<month>,<day>
integer
Range:
1 to 12
integer
Range:
1 to 31
Remote Control Commands
SYSTem Subsystem
on page 100
:SYSTem:PROTect<ch>[:STATe]
445