File Manager - R&S SMB100A Operating Manual

®
R&S SMB100A
If an instrument setting in which a sweep was activated is stored, the sweep is started
when the recall command is called.
If an instrument setting which accesses lists is stored, this list is also loaded.
If the list has been deleted in the meantime, an error message appears when the
instrument setting is loaded. If the list has been overwritten in the meantime, the new
entries will be used.
Remote command:
:MMEMory:LOAD:STATe
*RCL
Recall Immediate x
Loads the selected configuration from one of the three intermediate memories.
If an instrument setting in which a sweep was activated is stored, the sweep is started
when the recall command is called.
If an instrument setting which accesses lists is stored, this list is also loaded.
If the list has been deleted in the meantime, an error message appears when the
instrument setting is loaded. If the list has been overwritten in the meantime, the new
entries will be used.
A message appears if no instrument configuration is stored in this memory.
Remote command:
*RCL

File Manager

Accesses the "File Manager" dialog, see
on page 130.
Remote command:
n.a.
5.2.8.4 File Manager
The "File Manager" is a tool very similar to a standard Windows Explorer and helps
you manage mass storage media and files stored on the R&S SMB.
You can perform the following tasks:
●
Copying multiple files from disk to other media and vice versa, see
"Accessing the File System of the Instrument and Transferring Files from and to
the
●
Copying files into another directory, see
●
Renaming and deleting files, see
●
Creating new directories on the follwoing drives:
–
–
–
See
Operating Manual 1407.0806.32 ─ 21
on page 309
on page 282
on page 282
Instrument", on page 132
hard disk
internal flash memory
memory stick
Create New Directory
General Instrument Settings
Chapter 5.2.8.4, "File
Copy and Paste
Rename and Delete
Instrument Function
Manager",
Chapter 5.2.8.5,
130