R&S SMB100A Operating Manual page 351

®
R&S SMB100A
Example:
Manual operation:
[:SOURce<hw>]:CORRection[:STATe] <State>
Activates/deactivates level correction. Level correction is performed using the table
which has been selected with the command
SELect].
Parameters:
<State>
Example:
Manual operation:
[:SOURce<hw>]:CORRection:VALue?
Queries the current value for user correction.
Return values:
<Value>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:CORRection:ZERoing:STATe <State>
Activates the zeroing procedure before filling the user correction data acquired by a
sensor.
Parameters:
<State>
Manual operation:
Operating Manual 1407.0806.32 ─ 21
CORR:CSET '/var/user/ucor1'
selects the table ucor1.
CORR ON
activates level correction. Correction is performed using the
table ucor1.
See "User Cor. Data - User Correction"
[:SOURce<hw>]:CORRection:CSET[:
0 | 1 | OFF | ON
*RST: 0
SOUR:CORR:CSET '/var/user/ucor1'
selects the table ucor1.
SOUR:CORR ON
activates user correction.
See "State - User Correction"
float
Range: -100 to 100
Increment: 0.01
*RST: 0
CORR:VAL?
queries the value currently used for level correction.
Response: -3
the correction value is - 3 dB.
Query only
See "User Correction Value - User Correction"
0 | 1 | OFF | ON
See "Fill User Correction Data with Sensor"
Remote Control Commands
SOURce Subsystem
on page 159
on page 159
on page 159
on page 165
336