Lxi Status - R&S SMB100A Operating Manual

®
R&S SMB100A
If a "User defined"(see Mode)
option string in addition to the automatically created one.
Remote command:
*OPT?
5.2.3.16

LXI Status

The "LXI - LAN eXtensions for Instruments - Status..." dialog displays the settings and
status of the LAN and allows to reset the LAN connection.
For more information on LXI, see
LAN Status
The LED indicates the LXI status.
The LAN Status is also indicated with the LED "LAN Status" on the front panel of the
instrument.
"green"
"green (flashing)"
"red"
Remote command:
n.a.
LAN Reset
Initiates the network configuration reset mechanism for the instrument and resets the
hostname, MAC address, and IP address.
According to the LXI standard, a LAN Reset must place the following network settings
to a default state:
Parameter
TCP/IP Mode
Dynamic DNS
ICMP Ping
Password for LAN configuration
The LAN Reset for the R&S SMB also resets the following parameters:
Operating Manual 1407.0806.32 ─ 21
on page 281
normal operation
device identification
LAN fault
IDN String is selected, you can create a user defined
Chapter 2.8, "LXI Configuration",
Value
DHCP + Auto IP Address
Enabled
Enabled
LxiWebIfc
Instrument Function
General Instrument Settings
on page 45.
112