Kboard Subsystem; Hcopy:file[:Name]:Auto:state; Hcopy:image:format; Hcopy:image:size - R&S SMB100A Operating Manual

®
R&S SMB100A
Manual operation:
:HCOPy:FILE[:NAME]:AUTO:STATe <State>
Activates/deactivates automatic naming of the hardcopy files.
Parameters:
<State>
Example:
Manual operation:
:HCOPy:IMAGe:FORMat <Format>
This command selects the bitmap graphic format for the screenshot. You can also
retrieve the data using command HCOP:DATA?.
This command is an alias to command HCOPy:DEVice:LANGuage.
Parameters:
<Format>
Example:
Manual operation:
:HCOPy:IMAGe:SIZE <Size>
Selects the image size of the hardcopy. The first value of the size setting defines the
width, the second value the height of the image.
Parameters:
<Size>
Example:

7.9 KBOard Subsystem

The KBOard system contains the commands to set the external keyboard.
:KBOard:LANGuage
:KBOard:LAYout
Operating Manual 1407.0806.32 ─ 21
See "File Options"
0 | 1 | OFF | ON
*RST: 1
HCOP:FILE:AUTO:STAT OFF
Deactivates automatic naming.
See "Automatic Naming"
BMP | JPG | XPM | PNG
*RST: PNG
HCOP:IMAG:FORM XPM
Selects the image format XPM.
See "File Options"
string
*RST: depends on device
HCOP:IMAG:SIZE 640,480
Sets width and height of the image.
.......................................................................................................302
............................................................................................................ 302
Remote Control Commands
on page 123
on page 123
on page 123
KBOard Subsystem
301