Field
VLAN ID
PRIO
STATE
display mac-vlan interface
Syntax
display mac-vlan interface
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display mac-vlan interface command to display all the ports with MAC address-based VLAN
enabled.
Related commands: mac-vlan enable.
Examples
# Display all the interfaces with MAC address-based VLAN enabled.
<Sysname> display mac-vlan interface
MAC VLAN is enabled on following ports:
---------------------------------------
Ethernet1/0/10
mac-vlan enable
Syntax
mac-vlan enable
undo mac-vlan enable
View
Ethernet port view
Default Level
2: System level
VLAN ID of a MAC address-to-VLAN entry
802.1p priority corresponding to the MAC address of a MAC address-to-VLAN
entry
The state of a MAC address-to-VLAN entry, which can be:
S, indicating that the MAC address-to-VLAN entry is configured statically.
D, indicating that the MAC address-to-VLAN entry is configured
automatically through the authentication server
S&D, indicating that the MAC address-to-VLAN entry is configured both
statically and dynamically
Ethernet1/0/11
Ethernet1/0/12
Description
1-15