Set Link Type For Ethernet Port; Add The Ethernet Port To Specified Vlans - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - Port
Quidway S3000-EI Series Ethernet Switches
Table 1-8 Set Ethernet port broadcast suppression ratio
Set Ethernet port broadcast suppression ratio
Restore the default Ethernet port broadcast
suppression ratio
By default, 100% broadcast traffic is allowed to pass through, that is, no broadcast
suppression will be performed.

1.3.6 Set link type for Ethernet port

Ethernet port can operate in three different link types, access, hybrid, and trunk types.
The access port c
T he trunk port can belong to more than one V AN and receive/send the packe
m ultiple VLANs, used for connection between th
c arry more than one
con necting both the switches and user's computers. The difference between the hybrid
port an d the trunk port is that the hybrid port allows the packets from multiple VLANs to
be sent without tags, but the trunk port only allows the packets from the default VLAN to
be sent without tags.
Perform the following configuration in Ethernet port view.
Table 1-9
Configure the port as access port
Configure the port as hybrid port
Configure the port as trunk port
Restore the default link type, that is, the access port.
You can configure three types of ports concurrently on the same switch, but you cannot
switch between trunk port and hybrid port. You must turn it first into access port and
then set it as other type. For example, you cannot config
hybrid port, but first set it as access port
By default, the port is acc

1.3.7 Add the Ethernet port to Specified VLANs

T he following commands are used for ad
a ccess port can only be added to
added to multiple VLANs.
Operation
arries one V LAN only, used for connectin
VLAN and receive/send the
Set link type for Ethernet p
Operation
ess port.
Huawei Technologies Proprietary
Chapter 1 Ethernet Port Configuration
broadcast-suppression ratio
undo broadcast-suppression
L
e switches. The hybrid port can also
packets on multiple VLANs, used
ort
and then as hybrid port.
ding an Ethernet p
one VLAN, while the hy
1-6
Command
g to the user 's computer.
Command
port link-type access
port link-type hybrid
port link-type trunk
undo port link-type
ure a trunk port directly as
ort to a specified VLAN.
brid and trunk ports c
ts on
for
The
an be