Huawei AR150&200&1200&2200&3200 Series Enterprise
Routers
Configuration Guide - Device Management
----End
1.10 Displaying Interface Status
You can use the display commands to view the configuration and status of a specified interface.
Context
View the configuration of an interface.
l
View the status of an interface.
l
Procedure
l
l
Issue 05 (2014-01-16)
NOTE
Only AR3200 series support slave parameter.
After performing operations in a interface view, you can view the configuration about this
interface to check whether the configuration is correct.
You can view the status of an interface to monitor the interface or locate interface faults.
View the configuration of a specified interface.
1.
Run:
system-view
The system view is displayed.
2.
Run:
interface interface-type interface-number
The interface view is displayed.
3.
Run:
display this
The configuration of the current interface is displayed.
View the status of an interface using either of the following methods.
Method 1:
1.
Run:
display interface [ interface-type [ interface-number ] ]
The status of the specified interface is displayed.
Method 2:
1.
Run:
system-view
The system view is displayed.
2.
Run:
interface interface-type interface-number
The interface view is displayed.
3.
Run:
display this interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Displaying the Device Status
7