Display Mode - Huawei S3700 Series Quick Start Manual

S3700&S5700&S6700 Series Ethernet Switches
Quick Start

Display Mode

Figure 2-6 S5700-28P-LI-AC indicators
1
2
4
3 5
Table 2-9 Description of S5700-28P-LI-AC indicators
No.
1
Issue 02 (2012-09-10)
Status
Green
Blinking green
7
6
Indicator
Power
indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
Identifier Status
PWR Off
Green
Orange
2 Product Hardware Introduction
Description
The device is a not a command
switch:
l If the indicator of an interface
is steady on, the number of this
interface is the stack ID of the
device.
l If the first nine interface
indicators of the device are
steady on, the stack ID of the
device is 0.
The device is a command switch:
l If the indicator of an interface
blinks, the number of this
interface is the stack ID of the
device.
l If the first nine interface
indicators of the device blink,
the stack ID of the device is 0.
89
Description
The switch is
powered off.
The switch is
powered on.
The power supply
unit is faulty, and the
external RPS system
has started.
18