Method And Tools For Monitoring Router Components; Basic Router Component Monitoring Method; Figure 21: Basic Method For Monitoring Router Components - Juniper M Series Monitoring And Troubleshooting Manual

CHAPTER 3
Method and Tools for Monitoring Router
Components

Basic Router Component Monitoring Method

Figure 21: Basic Method for Monitoring Router Components

Check
component
status
No
Gather
alarm
information
Copyright © 2012, Juniper Networks, Inc.
Basic Router Component Monitoring Method on page 51
Basic Router Component Monitoring Tools on page 52
Common Operational Mode Commands To Monitor Router Components on page 56
Using the Basic Monitoring Method on page 59
Check the Router Component Status on page 60
Gather Component Alarm Information on page 67
Verify the Component Problem on page 114
Fix the Problem on page 114
Contact JTAC on page 115
Return the Failed Component on page 116
Figure 21 on page 51 shows the basic method you use to monitor router hardware
components.
Verify
problem problem
You should routinely monitor the status of all Juniper Networks routers running on the
network.
Yes
Yes
No
Fix Contact
JTAC
Done
Return
component
51