Figure 76: Tx Matrix Router Redundant Host Module Leds; Check The Tx Matrix Router Routing Engine Leds; Table 52: T1600 Router Host Subsystem Leds; Table 53: Tx Matrix Router Host Subsystem Leds - Juniper M Series Monitoring And Troubleshooting Manual

Meaning
Related
Documentation

Check the TX Matrix Router Routing Engine LEDs

Purpose
Action
Copyright © 2012, Juniper Networks, Inc.

Table 52: T1600 Router Host Subsystem LEDs

Label Color
Green
OK
FAIL Red
MASTER Green
T1600 Core Router Overview on page 34
Each host subsystem has three LEDs, located on the right of the craft interface, that
indicate its status. The LEDs labeled
slot and the TX-CB in slot
RE0
Routing Engine in slot RE1
Figure 76 on page 189 shows the host module LEDs on the TX Matrix router craft interface.

Figure 76: TX Matrix Router Redundant Host Module LEDs

Table 51 on page 188 describes the functions of the host subsystem LEDs.

Table 53: TX Matrix Router Host Subsystem LEDs

Label Color
Green
MASTER
Green
ONLINE
Green
OFFLINE
State Description
On steadily Host module is online and functioning
normally.
On steadily Host module is offline.
On steadily Host module is functioning as master.
show the status of the Routing Engine in
HOST 0
. The LEDs labeled
CB0
and the TX-CB in slot CB1 .
State Description
On steadily Host is functioning as the master.
On steadily Host is online and is functioning normally.
On steadily Host is offline.
Chapter 6: Monitoring the Routing Engine
show the status of the
HOST 1
189