Figure 18: Rear View Of A Tx Matrix Router - Juniper M Series Monitoring And Troubleshooting Manual

Hide thumbs Also See for M Series:

Table of Contents

Documentation

Figure 18: Rear View of a TX Matrix Router

The routing matrix has two main architectural components, the control plane and the

forwarding plane:

The control plane in the routing matrix is formed by the connection of the host

subsystems—TX-CBs in the TX Matrix router and T-CBs in the T640 routers —and the

Routing Engines.

The forwarding plane in the routing matrix is formed by the switch fabric—TX-SIBs in

the TX Matrix router and T640-SIBs in the T640 routers—and the Packet Forwarding

TX Matrix Plus Router Major Hardware Components on page 45

Chapter 2: T Series Core Routers