Juniper M Series Monitoring And Troubleshooting Manual page 666

M Series and T Series Routers Monitoring and Troubleshooting Guide
Meaning
Related
Documentation
622
FPM GBUS REV 09
FPM Display REV 05
CIP REV 06
PEM 0 Rev 11
PEM 1 Rev 11
SCG 0 REV 11
Routing Engine 0 REV 03
Routing Engine 1 REV 03
[...Output truncated...]
For TX Matrix Plus routers:
user@host> show chassis hardware sfc 0
sfc0-re0:
--------------------------------------------------------------------------
Hardware inventory:
Item Version
Chassis
Midplane REV 05
FPM Display REV 03
CIP 0 REV 04
CIP 1 REV 04
PEM 0 Rev 07
[...Output truncated...]
For all routers except the M160 router, T320 router, T640 router, and T1600 router, the
command output displays the power supply slot number, revision level, part number,
serial number, and the power supply type.
For the M160 router, T320 router, T640 router, and T1600 router, the command output
displays the power supply or Power Entry Module (PEM) slot number, revision level, part
number, serial number, and power supply type. When facing the back of the router,
is located on the right and
Checklist for Monitoring Redundant Power Supplies on page 607
710-002901 RA3317
710-002897 RA3249
710-002895 HS0716
740-002595 PM18581
740-002595 PM18582
710-003423 HR9871
740-008883 211123900250
740-008883 211123900201
Part number Serial number
JN112F007AHB
710-022574 TS4027
710-024027 DX0282
710-023792 DW4889
710-023792 DW4887
740-027463 UM26368
is located on the left.
PEM1
T640 FPM Board
FPM Display
T-series CIP
Power Entry Module
Power Entry Module
T640 Sonet Clock Gen.
RE-4.0 (RE-1600)
RE-4.0 (RE-1600)
Description
TXP
SFC Midplane
TXP FPM Display
TXP CIP
TXP CIP
Power Entry Module
Copyright © 2012, Juniper Networks, Inc.
PEM0