Table 34: T1600 Router Chassis Component Alarm Conditions - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
102
Table 33: T640 Router Chassis Component Alarm Conditions (continued)
Chassis
Component Alarm Condition
Temperature The chassis temperature
exceeded 55 degrees C, the
fans turned on to full speed,
and one or more fans have
failed.
The chassis temperature
exceeded 65 degrees C and
the fans have been turned on
to full speed.
The chassis temperature
exceeded 65 degrees C and a
fan failed. If this condition
persists for more than 4
minutes, the router shuts
down.
Chassis temperature
exceeded 75 degrees C. If this
condition persists for more
than 4 minutes, the router
shuts down.
The temperature sensor
failed.
Table 34 on page 102 lists the alarms that the chassis components can generate on a
T1600 router.

Table 34: T1600 Router Chassis Component Alarm Conditions

Chassis
Component Alarm Condition
Air filter Change the air filter.
Alarm
Remedy Severity
Check the room Yellow
temperature.
Check the air filter
and replace it.
Check the air flow.
Check the fan.
Check the room Yellow
temperature.
Check the air filter
and replace it.
Check the air flow.
Check the fan.
Check the room Red
temperature.
Check the air filter
and replace it.
Check the air flow.
Check the fan.
Check the room Red
temperature.
Check the air filter
and replace it.
Check the air flow.
Check the fan.
For technical support, Red
open a support case
using the Case Manager
link at
http://www.juniper.net
/support/ or call
1-888-314-JTAC (within
the United States) or
1-408-745-9500
(outside the United
States).
Alarm
Remedy Severity
Change the air filter. ------------------------
Copyright © 2012, Juniper Networks, Inc.