Figure 162: M40E And M160 Router Cooling System Components - Juniper M Series Monitoring And Troubleshooting Manual

Hide thumbs Also See for M Series:

Table of Contents

M Series and T Series Routers Monitoring and Troubleshooting Guide

Figure 162: M40e and M160 Router Cooling System Components

The cooling system draws in room air through the air intake vent located at the front of

the chassis below the cable management system. After entering the chassis, the air

stream separates into separate flows for the front and rear subsystems, and the

Miscellaneous Control Subsystem (MCS) monitors the temperature of each flow

independently.

Figure 163 on page 327

shows the M40e and M160 router cooling system components

and airflow.